Windows 2000 or Later
Phaser® 4510 Laser Printer
3-5
Other Methods of Installation
Your printer can also be installed on a network using one of these methods:
■
Microsoft TCP/IP Protocol
■
Microsoft IPP Port
You can monitor or configure your printer with CentreWare IS and a web browser if your
printer is connected to a network with the TCP/IP protocol enabled.
Note:
The CentreWare methods are not discussed in this section. See
Printer Management
Software
on page 3-2 (CentreWare IS).
Microsoft TCP/IP Protocol
Note:
For Windows XP, select
Classic Look
or the Windows XP procedures will not match
the steps below. To select Classic Look, click
Start
, click
Control Panel
, and then click
Taskbar and Start Menu
. Select the
Start Menu
tab, and then select the
Classic Start
menu
. Click
OK
.
To verify that TCP/IP is installed:
1.
Right-click the
My Network Places
icon on the desktop, and then click
Properties
.
2.
Right-click
Local Area Connection
, and then click
Properties
.
3.
Click the
General
tab to verify that
Internet Protocol (TCP/IP)
is installed.
■
If the Internet Protocol (TCP/IP) box is checked, the software is installed.
■
If the Internet Protocol (TCP/IP) box is not checked, the software is not installed.
Install TCP/IP software using the documentation provided by Microsoft, and then
return to this document.
Adding the Printer
To add the printer:
1.
On the desktop click
Start
, and then click
Settings
.
2.
Select one of these options:
■
Windows 2000
: Click
Printers
, double-click
Add Printer
to launch the Add Printer
Wizard, and then click
Next
.
■
Windows XP or Windows Server 2003
: Click
Printers and Faxes
. Double-click
Add Printer
to launch the Add Printer Wizard, and then click
Next
.
3.
Click the
Local Printer
button, and then click
Next
.
4.
Click the
Create a New Port
button.
5.
Select
Standard TCP/IP Port
from the New Port Type drop-down menu, and then click
Next
.
6.
Click
Next
.
