USB Connection
Phaser™ 3420 Laser Printer
29
Automatically Setting the Printer’s IP Address
Use the automatic installer on the
Software and Documentation CD-ROM
to detect and/or
assign an IP address to your printer. For further instructions, insert the
Software and
Documentation CD-ROM
into your computer’s CD-ROM, launch the installer, then follow the
prompts for installation.
Note
For the automatic installer to succeed, the printer must be connected to a TCP/IP network.
Manually Setting the Printer's IP Address
1.
At the printer's front panel, press the
Menu
button, select
Connection,
then press the
OK
button.
2.
Select
Network Setup
, then press the
OK
button.
3.
Select
TCP/IP Setup
, then press the
OK
button.
4.
Select
BootP/DHCP
, select
Off
, press the
OK
button, then press the
Back
button.
5.
Select
IP Address
, then enter each of the four groups of numbers in your printer’s IP
Address, pressing the
OK
button after each group.
6.
Select
Network Mask
, then enter each of the four groups of numbers in your printer’s
Network Mask, pressing the
OK
button after each group.
7.
Select
Gateway
, then enter each of the four groups of numbers in your printer’s Gateway,
pressing the
OK
button after each group.
8.
Press the
Back
button four (4) times to return to
Ready
.
9.
Reboot your printer by cycling on the power.
USB Connection
The USB connection requires a standard USB cable. This cable is included with your printer.
Verify that you are using the correct USB cable for your connection.
Windows 98 and Me
Connect the USB cable to the PC and follow the
Add New Hardware Wizard
to create the
USB port. Follow the
Add Printer Wizard
to install the printer driver from the
Software and
Documentation CD-ROM
.
Содержание phaser 3420
Страница 1: ...Phaser 3420 Laser Printer i ...
Страница 55: ...Index Phaser 3420 Laser Printer Index 4 ...