Xerox Phaser 3330 Скачать руководство пользователя страница 415

Страница: 415 / 434

Maintenance

Phaser 3330 and WorkCentre 3335/3345

Xerox Internal Use Only

Service Manual

6-6

Moving the Printer

The printer, with toner installed is heavy. The weights shown below.

CAUTION:

When moving the printer over long distances, remove the Toner Cartridge to prevent

toner spills.

Before moving the printer, do the following:
1.

Turn the printer Off and disconnect all cables.

Allow the printer to cool about 40 minutes.

Remove media from the output tray and return the Output Tray Support to its closed position.

Remove the media from the Bypass Tray and return the Tray Extension to its non-extended
position.

Push in the Bypass Tray side paper guides until they stop to hold the Tray Extension in the closed
position while moving the printer.

Close the Bypass Tray.

See

Undocking the Printer

to undock the printer from the Optional Tray 2 base.

Lift and carry the printer as shown in the illustration.

CAUTION:

Do not tilt the printer more than 10 degrees to the front or back, or left or right. Tilting

the printer more than 10 degrees may cause toner spillage.

CAUTION:

Failure to properly repackage the printer for shipment can result in damage not

covered by the warranty, Service Agreement, or Total Satisfaction Guarantee.

Содержание Phaser 3330



















































































































































































































































































































































































































































Результаты поиска

Содержание Phaser 3330

Отзывы:

Похожие инструкции для Phaser 3330

Бренды по названию

Популярные бренды

Xerox Phaser 3330, Руководство по обслуживанию

Результаты поиска

Содержание Phaser 3330

Отзывы:

Похожие инструкции для Phaser 3330

Бренды по названию

Популярные бренды