Xerox PHASER 3116 Скачать руководство пользователя страница 92

Страница: 92 / 132

OLVING

ROBLEMS

Solving General Printing Problems

For problems with the operation of your printer, refer to the table
for suggested solutions.

Problem

Possible Cause

Solution

The Printer
does not print

The printer is not
receiving power.

Check the power cord connections. Check
the power switch and the power source.

The printer is not
selected as the default
printer.

Select

Xerox Phaser 3116

in the

Printer folder in Windows as your default
printer.

Check the printer for
the following:

• The printer cover is not closed.

• Paper is jammed.

• No paper is loaded.

• The toner cartridge is not installed.

If a printer system error occurs, contact
your service representative.

The printer may be in
Manual Feed mode.

Add paper to the manual feeder and

press the

button on the printer’s

control panel to begin printing.

The connection cable
between the computer
and the printer is not
connected properly.

Disconnect the printer cable and
reconnect it.

The connection cable
between the computer
and the printer is
defective.

If possible, attach the cable to another
computer that is working properly and
print a job. You can also try using a
different printer cable.

The port setting is
incorrect.

Check the Windows printer setting to
make sure that the print job is sent to the
correct port. If the computer has more
than one port, make sure that the printer
is attached to the correct one.

The printer may be
configured incorrectly.

Check the printer properties to ensure
that all print settings are correct.

Содержание PHASER 3116





































































































































Результаты поиска

Содержание PHASER 3116

Отзывы:

Похожие инструкции для PHASER 3116

Бренды по названию

Популярные бренды

Xerox PHASER 3116, Руководство пользователя

Результаты поиска

Содержание PHASER 3116

Отзывы:

Похожие инструкции для PHASER 3116

Бренды по названию

Популярные бренды