manualshive.com logo in svg

Xerox Legacy 4127, Руководство пользователя, Страница: 133 / 224

Поделиться
Скачать
Xerox Legacy 4127 Скачать руководство пользователя страница 133

Problem Solving

Xerox 4112/4127 EPS

7-31

User Guide

Paper Jams inside body

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared 
before proceeding with your copy/print jobs.

1.

Make sure that the machine has stopped printing before opening the front cover. 

2.

Turn the green lever at the center of the transfer module to the right until it is in the 
horizontal position and then pull the transfer module out to the end.

3.

Lift up lever 2b to remove jammed paper. Then turn knob 2b to remove jammed paper. 

4.

If the jam occurs at the top of the transfer module or inside the fuser unit: 

a.

Open the Front cover.

b.

Unlock the unit by pushing down on lever 2.

c.

Pull the fuser drawer towards you until it stops.

d.

Remove the jammed paper by pulling it out towards the left. If the jammed paper 
cannot be removed, then,

WARNING

Never touch a labeled area (found on the fuser unit or nearby) indicating “High Temperature” and 
“Caution.” Contact can lead to burns.

Содержание Legacy 4127

































































































































































































































Отзывы:

Нет отзывов