Xerox Legacy 4127 Скачать руководство пользователя страница 131

Страница: 131 / 224

Problem Solving

Xerox 4112/4127 EPS

7-29

User Guide

Paper Jams in Tray 8 (Post-Process Inserter)

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your copy/print jobs.

Press the

Cover

button.

Open cover

1e and then remove the jammed paper and all paper loaded in the Post-Process

Inserter.

Note

If paper is torn, check inside the machine and remove it.

Fan the paper you removed, making sure that all four corners are neatly aligned, and then
load them again.

Push cover 1e until you hear it click into place.

Note

A message will be displayed and the machine will not operate if the cover is open even
slightly.

Содержание Legacy 4127

































































































































































































































Результаты поиска

Содержание Legacy 4127

Отзывы:

Xerox Legacy 4127, Руководство пользователя, Страница: 131 / 224

Результаты поиска

Содержание Legacy 4127

Отзывы: