Xerox FreeFlow version 6.0, Системное руководство

Страница: 92 / 112

7 - 1 4
System Guide
Troubleshooting
status_log
The status_log contains information about the attributes of a job
once it has been accepted and tracked by the system.
The attribute information found in this file is as follows (the
sequence and attributes displayed vary with the job):
Logging Module /t# Sender Name /t# Data Size /t# Document
Name /t# Document Format /t# Job ID /t# Virtual Printer Name /t#
Message /t# Time /t# Network Protocol /t# Assigned Physical
Printer /t# Plex /t# Plex Requested /t# Disposition
ep_exception_log and ep_primary_log
These logs contain a list of faults. The ep_exception_log contains
a listing of all logged faults. The ep_primary_log contains
exceptions that are the primary cause of the problem.
The format of these files is as follows:
Logging Module /t# Absolute Time /t# Microseconds /t# Instance
ID:Module TD /t# Exception ID /t# Service Code
LPR logs
The following logs are important for troubleshooting problems in
mapping NPS and Xerox FreeFlow Print Server:
• LPR logs that contain information related to the LPR gateway
such as missing jobs or communications problems.
Examples:
/opt/XRXnps/log/XLP/Debug.Log
• JPM logs that contain information related to the Job Pool
Manager (JPM). The attribute set by the LPR Gateway can be
checked and verified by looking at this log:
/opt/XRXnps/
log/JPM.Debug.Log
.
Printing the accounting log
Print the Accounting log to gather information and recover from
various accounting problems. Either the entire Accounting log or a
portion of the log may be printed. This can be completed on the
Xerox FreeFlow Print Server interface in the [Administration]
section.