Installation Preparation Document
(for physical installation of the product only)
Xerox DocuTech 128/155/180 HighLight Color
701P46159
October 2006
NOTE: The formula for the DocuTech HLC fuser lubricant was
changed in 2006 to provide better image quality and to prevent image
transfer. The new fuser formula is called Fuser Shield. The Fuser
Blend and the Fuser Shield CANNOT be intermixed in a DocuTech
HLC. To change from one fuser lubricant to another requires a
service call and cleaning or replacing components. The two fuser
formulas are identified with different color bottles and caps.
PDL Compatibility
The system interprets the following data streams:
•
PostScript Level 3
•
HP PCL5c / HP PCL6
•
ASCII
•
•
TIFF
If a machine is running with in-line finishing equipment, the new Fuser
Shield may contribute to poor binding at the binder glue seam.
Customers experiencing this problem can have their equipment
returned to using Fuser Blend by placing a service call to clean
and/or replace components. Do NOT place Fuser Blend in a
machine that has been using Fuser Shield.
•
VIPP
•
PPML
•
LCDS/Metacode and IPDS will be customer options which may
be acquired as they become available, and will be offered under
standard Xerox terms and conditions.
Printing Considerations
•
Monthly duty cycle is up to 4 million (DT 128 HLC), 4.5 million
(DT 155 HLC) or 6 million (DT 180 HLC).
Not all features and capabilities are available with every print driver
and OS/Protocol combination. Custom software applications may
produce unexpected results.
•
The Xerox Supplies Marketing Center, 1-800-822-2200, is
available for ordering Xerox supplies, including paper and other
throughput material.
Other Considerations
•
The Dry ink waste container supply is maintained at the
customer site by the Xerox Service Representative and is not
orderable by the customer.
•
The Xerox Welcome Center at 1-800-821-2797 is available to
provide customer support.
Network Connectivity
The DT 1xx HLC supports the following connectivity:
Network Operating
System
Protocol
Topology
Novell 3.x / 4.x
(NDS or Bindery
mode)
IPX / SPX
Ethernet
Windows NT 4.0 /
Win2000 / WinXP
TCP / IP LPR
Ethernet / Token Ring
AppleTalk EtherTalk Ethernet
LPD Server
(Unix Systems)
TCP / IP
Ethernet / Token Ring
Online Channel
IBM
3211/4245
Ethernet / Token Ring
Bus and Tag
NOTE: Token Ring is not available for AppleTalk or Novell
environments.
The system supports Port Printing, and HTTP and IPP Printing
modes. Additionally, SNMP Services and DocuSP Remote Workflow
can be enabled on the customer’s network.
Print Drivers - Environments
The DT 1xx HLC supports the following print drivers:
•
Windows 95/98/ME/2000/XP
•
Windows NT 4.0
•
MAC OS 8.6 & higher
•
Solaris 2.8
Additional Optional Interface Requirements
Online – Bus and Tag supporting IBM 3211/4245 interface.
