Xerox DocuPrint N4525, Руководство по расширенным функциям и устранению неисправностей

Страница: 112 / 138

96 DocuPrint N4525 Network Laser Printer
Control Panel Messages
Ready The printer is online and waiting for data to print.
Remove Output
Face-down Bin The Face-down Bin is full and printing cannot continue.
■
Remove the output from the Face-down Bin.
Remove Output
from Finisher
■
Remove the output from the Finisher bin. Depending on the Output Timeout
setting (in the System Menu), the printer either stops printing or directs the
output to the face-down bin.
Replace Print
Cartridge The Laser Print Cartridge has reached its end of life. Printing cannot resume.
■
Replace the cartridge.
Reset
ENV/Bypass
■
Clear the paper jam in the Envelope Feeder or Bypass Feeder (see the Paper
Jams section of the User Guide ) and then reset the Envelope Feeder or Bypass
Feeder.
Reset Trays 2,3 Clear the paper jams in trays 2 and/or 3 (see the Paper Jams section of the User
Guide ) and then reset the trays.
ROS Trouble
Power Off/On There is a problem with the ROS controlling ASIC.
■
Power OFF the printer and power it ON again.
■
If the message appears again, contact your Customer Support Center.
Slide In
Finisher The Finisher guide rail is not entirely in position.
■
Slide the guide rail into position. Make sure it is securely snapped into the
console. Check to see that the thumb screw that connects it to the Finisher is
hand tightened.
SNMP Resetting SNMP MIB data base is being re-initialized.
■
Wait.
Staple Failure Staple Failure.
■
Power OFF and ON the printer.
Toner Low Toner is getting low in the Laser Print Cartridge. Printing will continue
without interruption until the cartridge is empty.
■
Replace the cartridge as soon as possible.
Tray 1 Empty Tray 1 is no longer being used to print because it is empty.
■
Refill tray 1 if it is to be used again.
Tray 2 Empty Tray 2 is no longer being used to print because it is empty.
■
Refill tray 2 if it is to be used again.
Tray 3 Empty Tray 3 is no longer being used to print because it is empty.
■
Refill tray 3 if it is to be used again.
Tray 4 Empty Tray 4 is no longer being used to print because it is empty.
■
Refill tray 4 if it is to be used again.
Tray 5 Empty Tray 5 is no longer being used to print because it is empty.
■
Refill tray 5 if it is to be used again.
Tray n Lifting The specified tray has been refilled, is rising into position and will soon be
ready for printing.
Error Description and corrective action