Xerox DocuPrint N24, Руководство системного администратора

Страница: 390 / 398

D o w n l o a d i n g F o n t s a n d M a cr o s
3 0 D o c u me n t a t io n U p d at e X e r o x D o c uP r in t N 24 / N 3 2 / N 4 0
ENGL
I
S
H
Creating Proof
Jobs
The following discussion of the Creating Proof Jobs replaces the
discussion Chapter 5 of your System Administrator Guide.
Proof printing lets you print a single copy of a multiple copy job. You
assign a password and copy count at your workstation or computer
before printing. The first set is printed immediately. You can then go
to the printer and proofread (proof) the first set. Depending on the
outcome of the proofing, you can then decide either to continue
printing the sets or to delete the job after entering your password on
the Printer Control Panel.
Proof jobs, if not sent by a driver with the proof job feature, may be
invoked in both PCL and PostScript by preceding the job with the
following PJL commands:
@PJL XPROOFJOB
@PJL XJOBPASSWORD = number
These commands must be immediately followed by a standard PJL
“JOB” command that includes the “jobname”.
The printer continues processing all subsequent data as part of the
proof job of name “jobname.” The proof job is stored with the name
“jobname” and associated with the password defined in the PJL
XJOBPASSWORD command. The proof job ends when the PJL End of
Job command is received (i.e., @PJL EOJ). The “EOJ” command
should be followed by a UEL.