Xerox DocuPrint N17, Руководство пользователя

Страница: 45 / 102

Loading Paper
Chapter 4: Paper Loading and Orientation
❖
4-15
If you are not changing paper size, go to Step 2.
1
Adjust the end and width guides to fit the size of paper
you are loading.
A
Lift up one side of the end guide (1) at the rear of the
tray, then lift up the other side of the end guide.
B
Pull out the tray to lengthen it, or push it in to shorten
it.
C
Press both sides of the end guide down until it clicks
into place at the desired length.
D
Slide the width guide (2) to fit the width of the paper.
2
Load paper. Refer to Table 4.4 on page 4-16 for correct
paper orientation.
The type of paper loaded (plain, prepunched,
letterhead, transparency, etc.) must be set using the
Tray 2 Type (or Tray 3 Type) item in the Control
Panel’s Tray Menu (refer to Chapter 3 of the System
Administrator Guide).