Xerox DocuPrint 4850, Руководство по планированию установки

Страница: 87 / 226

Controller specifications and requirements
Installation Planning Guide 5-9
For a summary of printer hardware specifications and
requirements, refer to the “Printer specifications and
requirements” chapter of this guide. Contact your service
representative if you have questions not specifically addressed in
this guide.
Table 5-3. DocuPrint NPS/IPS printer controller specifications and power requirements:
Sun Blade 1000
Device
Dimensions (depth,
width, height)
Weight
Heat
dissipation Power requirements
Cable lengths
Processor d=25 in. / 63.5 cm
w=10 in. / 25.4 cm
h=17.75 in. / 45.1 cm
70 lbs. /
31.8 kgs 1,100 BTU
per hour 60 Hz:
100 to 240 VAC,
15 amp, 0.4 KVA,
5-15 NEMA
50 Hz:
100 to 240 VAC,
15 amp, 0.4 KVA
Power: 8 ft. /
2.4 m
Interface to
printer:
20 ft. / 6.1 m
usable length
Monitor d=10 in. / 25.4 cm
w=17.5 in. / 44.5 cm
h=18.5 in. / 47 cm
18 lbs. /
8.2 kg 408 BTU
per hour 100-120 ~ VAC,
1 phase, 50-60 Hz,
3.0 amp, 0.4 KVA
200-240 ~ VAC,
1 phase, 50-60 Hz,
2.0 amp, 0.4 KVA
Video cable to
processor:
46 in. / 1.17 m
4 mm
cartridge
tape drive d=12.25 in. / 31 cm
w=7.5 in. / 19 cm
h=2.75 in. / 7 cm
8 lbs. /
6.6 kg --- 100-120/200-240 VAC,
0.8/0.4 amp, 47-63 Hz SCSI cable to
processor or
additional SCSI
device:
28 in. / 71 cm
Keyboard d=7.5 in. / 19.1 cm
w=20 in. / 50.8 cm
2 lbs. /
1kg --- --- 72 in. / 1.8 m
Mouse d=3 in. / 8 cm
w=4 in. / 10 cm
h=2 in. / 5 cm
0.3 lbs. /
0.14 kg --- --- 25 in. / 63 cm
Channel
interface
board and
channel
cable
connector
box (channel
attached
systems
only) d=9.7 in. / 24.6 cm
w=27.1 in. / 68.8 cm
--- --- 100 to 240 VAC,
15 amp, 0.4 KVA Bus and tag
cables must
conform to host
system
requirements
(200 gray cable
to 400 ft. blue
cable / 66.7 to
133.3 m) and
accommodate
system setup.
Cable from board
to box: 3 ft / 91.5
cm