Xerox DocuPrint 4850, Руководство по планированию установки

Страница: 31 / 226

System overview
Installation Planning Guide 1-11
• You must run the TCP/IP protocol on the primary network
device. You may also run TCP/IP on other network devices.
For each network device running TCP/IP, you must specify a
unique IP address and IP netmask. For the primary network
device, you must specify the HostName and router IP
address. The HostName for any secondary devices is
created from the name chosen for the primary device.
NOTE: You may not use the controller as an IP router.
Consequently, the router IP address must be on the primary
network devices network only.
• You may run the AppleTalk protocol on only one network
device. The network device on which AppleTalk is run does
not have to be the primary network device.
• You may run Novell protocols on only the primary network
device.
Network client components
To send print jobs to the NPS/IPS printer, the customer needs to
provide the proper client hardware as well as operating system
and network software.
Supported client hardware and operating systems
Xerox NPS/IPS supports the following types of networked client
workstations and operating systems:
• Sun workstation running a Sun or Linux operating system
• PC running MS-DOS 6.2 and Microsoft Windows 95, 98, NT,
4.0, 2000, and ME using Ethernet with TCP/IP or Novell
NetWare 3.11 and 3.12.
NOTE: Customers using Novell 4.1 must set the “Bindery
Emulation Mode” to be backwards compatible with Novell 3.11
and 3.12.
• IBM RS/6000 running IBM AIX, version 4.1
• HP/Apollo running HP-UX, version 10.01
• DECStation 5000/200 running DEC Ultrix, version 4.3
• Apple Macintosh, System 7.x or 8.x, using AppleTalk through
EtherTalk, phase 1 or 2
• Any system that supports RFC-1179 lpr/lpd