Xerox DocuPrint 4850 NPS, Руководство по настройке

Страница: 88 / 276

STARTING AND STOPPING THE SYSTEM
3-24 XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Powering off the system
Power off the system by using the Halt System command in the
DocuPrint Print Service window or by selecting Shutdown from the
background menu.
Caution: Do not power off the Printer Controller without following
one of the procedures below to halt the system first. Failure to follow
the proper procedures may result in damage to the software and
hardware.
Using the Halt System command to stop the system
1. In the DocuPrint Print Service window, at the PS> prompt, enter
privilege operator .
2. Enter stop queueing .
3. Enter list documents .
Wait for any documents currently pending or being printed to
complete.
4. Enter halt system .
5. Once the OK prompt is displayed, switch off the power using the
power switch located on the back of the Printer Controller CPU
unit.
Using the background menu to stop the system
1. In the DocuPrint Print Service window, at the PS> prompt, enter
privilege operator .
2. Enter stop queueing to stop queueing.
3. Enter list documents .
Wait for any documents that are pending or being printed to
complete.
4. Move the cursor to the background area outside any open
windows.
5. Press and hold the right mouse button.
6. Select [Shutdown] in the pop-up menu, and release the right
mouse button.
7. Select [Confirm].
8. Select [Continue].
Once the OK prompt is displayed, switch off the power using the
power switch located on the back of the Printer Controller CPU unit..