Xerox DocuPrint 4850 NPS, Руководство по настройке

Страница: 158 / 276

SETTING SYSTEM DEFAULTS
5-24 XEROX DOCUPRINT NPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Default values vary based on model, resolution, and version of PCL.
Setting PCL parameters
The Change PCL Parameters command allows you to define the
environment for PCL 5 printing.
The Restore Default PCL Parameters command allows you to reset
the parameters to the defaults.
The Show PCL Parameters command allows you to view the current
settings.
Changing PCL parameters
Use the Change PCL Parameters command to define the settings
you require for PCL 5 printing. Do this before you begin printing your
PCL jobs. You can define parameters for:
•
Saving the environment—whether you want permanent macros
and fonts that you download to be saved to disk for use with
PCL jobs.
•
Specifying edge-to-edge printing—whether you want your PCL
jobs to use edge-to-edge printing.
•
Automatically adding a carriage return (CR) or line feed (LF) to
all line endings.
•
Specifying a symbol set.
Table 5-1. Default PCL Imager Parameters
4050/4090
(300 dpi)
4850/4890/92C
(300 dpi)
92C
(600 dpi)
96/4635/180
(300 dpi)
96/4635/180
(600 dpi)
PCL 5e PCL 5c PCL 5e PCL 5c PCL 5e PCL 5e PCL 5e
Enhance Graphics True False False False False False True
Built-in Pattern True False False False False True True
Enhance Strokes 2 0 0 0 0 1 2
User-defined
pattern 1 2 0 2 0 1 1
Bitmap Font True False False False False False True