Restore Default Imager Parameters (A)
Resets the imager parameters to the default values.
Restore Default PCL Imager Parameters (A)
Resets the PCL imager parameters to the default values.
Restore Default PCL Parameters (A)
Restores default PCL parameters.
Restore IPDS Input Groups (A), (O)
Reads a floppy created in IPS 7.2 and creates virtual printers for the
input groups.
Restore Site Files (A)
Restores site files from the diskette or tape you created
using the Backup Site Files command.
Restore Virtual Printers List (A)
Restores virtual printer list from the diskette or tape you created using
Backup Virtual Printers List.
Restore Xerox Files (A)
Restores Xerox files from the diskette or tape you created
using the Backup Xerox Files command.
Set Channel Online | Offline (A) (O)
Switches the IPDS channel between the online and offline states.
Set ColorTRC <destination profile name> <source TRC or profile
name> (A)
Corrects an existing calibration for printer color drift. Replaces
the TRC specified with another TRC.
Set Default Color Calibration <name> (A)
Makes the specified color calibration the default.
Set Default Media <size> <type> <color> <weight> (A), (O)
Sets the default media for the printer.
Set Default Virtual Printer (A), (O)
Sets the system default virtual printer.
Set <Input | Output> Profile (A)
Sets the profile for the optional input or output device after
creating it (input device available for 96, 4635, or 180 NPS only).
Set IPDS Virtual Printer <VP> (A), (O)
Sets the virtual printer to which to submit IPDS jobs. IPDS uses the
media list for this virtual printer. Restarts the IPDS Parser and makes
sure that the specified virtual printer is enabled.
Set Option <name> <value> (A)
Sets the specified option to the indicated value.
Set Option Help (A)
Displays a list of the available printing options and a description of
each option.
Set Scheduling Policy <resourcematch | firstcomefirstserved> (A), (O)
Sets the policy by which the system determines the next job to print.
Set Stacker To Group <Stacker> <Group> (A)
Adds the specified stacker to the specified group.
Set Status Message <message> (A), (O), (U)
Allows you to set a message that will display when the Show Status
command is entered.
Set Time <time | remote host name | IP address> (A), (O)
Sets the time and date at the printer controller.
Set Tray <n> <size> <type> <color> <weight> (A), (O)
Allows you to set the media for a specified paper tray.
Set Tray <n> Default (A), (O)
Sets the size of paper currently set in the tray using default
type, color, and weight values.
Set Tray <TrayN> Position <Position> (A), (O)
Sets the ordered-media position for the specified tray.
Set Tray <TrayN> Purge|NoPurge (A), (O)
Specifies whether the tray can be used for paper purging.
Set Tray <n> Tray <m> (A), (O)
Sets Tray <n> to the same media specifications as Tray <m>.
Set Tray From Virtual Printer Media <VP> (A), (O)
Matches the media list for the specified virtual printer against paper
sizes in trays, then prompts the user to assign the needed media to
specific trays using Set Tray.
Set Virtual Printer Flags <Name> <ExportToAppletalk> (A) (O)
Sets ExportToAppletalk flag of virtual printer.
Show Default Color Calibration (A)
Displays the default color calibration.
Show Default Media (A), (O), (U)
Lists the default media for the printer.
Show Document Attributes <docID | custom specification> (A), (O), (U)
Lists the attribute values of the specified document.
Show HostID (A)
Shows the host ID in hex for licensing.
Show Imager Parameters (A)
Allows you to display the current imager parameter values.
Show <Input | Output> Profile (A)
Lists profiles set for optional input or output device (input
device available for 96, 4635, or 180 NPS only).
Show IPDS Status (A), (O)
Shows status information for IPDS, including whether the IPDS
channel is online or offline, and the current IPDS virtual printer.
Show IPDS Tracing (A)
Shows whether IPDS tracing is on or off, and the name of the current
or most recent trace output file.
Show IPDS Virtual Printer (A), (O)
Shows the virtual printer in use for IPDS jobs. IPDS uses the media list
for this virtual printer.
Show License Status (A)
Displays license status of software.
Show Log (A), (O)
Displays all or part of the log specified.
Show Option <name> (A)
Displays the current setting for the specified option.
Show PCL Imager Parameters (A)
Allows you to display the current values of the parameters.
Show PCL Parameters (A)
Displays PCL parameters.
Show Scheduling Policy (A), (O)
Displays the site scheduling policy specified with the Set
Scheduling Policy command.
Show Status (A), (O), (U)
Displays the status of the printer.
Show Time (A), (O), (U)
Displays the time.
Start <printing | queueing | all> (A), (O)
Starts printing, queueing, or both.
Start IPDS Printing (A), (O)
Starts the printing of IPDS jobs.
Start IPDS Tracing <FileName> (A)
Starts tracing for IPDS jobs, writing the trace to the specified file.
Start Virtual Printer <name> (A), (O)
Allows you to start a virtual printer.
Stop <printing | queueing | all> (A), (O)
Stops printing, queueing, or both.
Stop IPDS Printing (A), (O)
Stops the printing of IPDS jobs.
Stop IPDS Tracing (A)
Stops tracing for IPDS jobs, showing the most recent output file
name.
Stop Virtual Printer <name> (A), (O)
Allows you to stop a virtual printer.
Unset Stacker <StackerN> (A), (O)
Removes stacker from use. Available for systems with two
stackers plus top tray.
Unset Tray <TrayN> (A), (O)
Removes media information from the specified tray.
Wizard Mode (A)
Provides access to a UNIX shell. Enter
exit
to return
to the Administrator level of commands.
©
2002 by Xerox Corporation. All rights reserved.
Xerox DocuPrint NPS/IPS
Printer Controller Commands
Quick Reference Card
Refer to this card for quick reference when using the Xerox
DocuPrint NPS/IPS printer controller
command line
interface
or
telnet remote access
.
This reference card supplements the
Xerox DocuPrint NPS/
IPS Guide to Managing Print Jobs
and
Guide to Configuring
and Managing the System
and should not be considered a
replacement for other DocuPrint NPS/IPS documentation.
Refer to these guides for detailed instructions on the use of
your DocuPrint NPS/IPS printer controller software.
Accessing printer controller
commands
You use the DocuPrint Print Service window to enter the commands
that allow you to control most functions of the printer controller. You can
also enter many of the commands using telnet remote access.
There are four levels of printer controller commands: User, Operator,
Administrator, and Service. Operator and Administrator commands
may require a password.
To access the Operator or Administrator commands, enter
privilege
<operator|administrator>
at the PS> prompt. Then enter the
password if required.
You can enter
?
at the command prompt to display all available User,
Operator, or Administrator commands.
You do not need to enter commands in full, only enter enough to
distinguish them from the other commands. For example, you can
enter
li doc
for the List Documents Command.
You can abort most commands by pressing <CONTROL> <C>.
Before you leave the system unattended, return to the User level of
commands by entering
privilege user
at the prompt.
Version 8.0
October 2002
721P90621
