Xerox DocuPrint 180 IPS Series, Руководство по планированию установки

Страница: 45 / 200

PREPARING FOR INSTALLATION
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 4-5
-2 Inspect and approve site. Xerox ________
Order consumable supplies. Minimum supplies
needed for installation are:
•
Paper (2 cartons)
•
Developer (1 carton) or
Developer, MICR (1 carton)
•
Fuser agent (2 boxes).
•
Dry ink (1carton). or
Dry ink, MICR (1 carton).
Note: After installation, you will need to
establish a procedure for ordering supplies
according to your ongoing production
requirements.
Chapter 4,
Appendix A, and
sales rep.
5R161
5R573
8R2955
6R206
6R819
Customer and Xerox ________
-1 Schedule operator training. Systems analyst
(U.S.) or site
representative
(non-U.S.) Customer and Xerox ________
Define parameters needed to configure PSF for
connectivity to the IPS printer. Appendix D and E Customer ________
Install Make sure supplies are available. Chapter 4 and
Appendix A Customer ________
Make sure system administrators are available
during software installation. Customer ________
Provide host channel address and channel unit
address (if printing via channel). Customer ________
Provide host IP address. Appendix D and E Customer ________
Sysgen your host to print to an AFP Type 1,
Group 3 printer. Customer and Xerox ________
Set up Data Transfer Mode. Customer and Xerox ________
Install 96/4635/180 IPS printer hardware and
software. Xerox ________
Have operators available for training. Appendix B Customer ________
Check documentation and software kits for
completeness. Customer ________
Have test jobs ready to run. Customer ________
Provide stocks needed for default input
configuration Customer ________
Provide parameters needed to configure PSF
for connectivity to the IPS printer. Appendix D or E Customer ________
Table 4-1. 96/4635/180 IPS installation planning checklist
(continued)
Week Activity Reference Responsibility
Date
completed