Xerox DocuPrint 180 IPS Series, Руководство по планированию установки

Страница: 145 / 200

DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-3
SYS1.PROCLIB, although your system may use a different
library.)
The JES2 PROC has a DD statement (normally HASPPARM),
which points to the initialization dataset. (The location of this
statement is ‘SYS1.PARMLIB(JES2PARM);’ however, you
should always verify the location on your own system.)
2. Enter the following required commands in the JES2 initialization
dataset to define the PSF functional subsystem (FSS):
•
One FSS statement for each PSF functional subsystem
•
One PRT nnnn statement for each functional subsystem
application (FSA) under control of the FSS. (This can also
be specified as PRINT
nn or PRINTER n .)
The following table lists the JES2 FSS statement parameters to
be defined.
Table E-1. JES2 FSS statement parameters
Item
description
Default Source of value
Range of
acceptable values Comments
Your value
PROC None PSF Startup procedure
name/ 1 to 8-character
alphanumeric string Specifies name of
procedure for starting this
FSS. Different FSS
statements can refer to the
same startup procedure.
AUTOSTOP NO Installation
preferences YES or NO Specifies whether FSS
address space is stopped
automatically if all FSAs
under control of the FSS
are stopped.
HASPFSSM HASPFSSM JES2 Load module to
be loaded into FSS
address space HASPFSSM Either omit parameter or
specify default value of
HASPFSSM.
CLASS None Installation output
class standards List of
alphanumeric
output classes Can also be specified as
QUEUE=
COPYMARK DATASET Installation
preferences DATASET or JOB
or CONSTANT DATASET: IPS printer will
offset-stack or stitch on a
dataset boundary.
JOB: IPS printer will offset-
stack or stitch on a job
boundary.
CONSTANT: Copymarks
are constant; no offset
stacking or stitching is
done.
FORMS None Forms that will be
printed on this printer 1 to 8 form names
(each 1 to 8
alphanumeric
characters in
length) If WS is F, only output with
these form names will be
selected for printing on this
printer.
FSS None Name of FSS 1 to 8-character
alphanumeric string Required