Xerox DocuPrint 100MX, Руководство пользователя, Страница: 50 / 74

IPS Gateway operation
IPS Gateway User’s Guide (5/2002) 3-14
Output Setup tab
This section describes the options on the Output Setup tab (shown below).
These options control the generated PostScript output sent to the queue.
Output Resolution
The Output Resolution option allows you to specify the dots per inch (dpi)
resolution of the PostScript output to be sent to the printer.
To specify the output resolution:
Step 1. From the drop-down box in the Output Resolution area, select the dots
per inch (dpi) resolution of the PostScript output to be printed.
NOTE: Running at 600 dpi may add additional processing overhead.
You must weigh performance against your printing needs.
The output resolution must match the resolution set on the
PostScript/PDF tab under the queue properties in DocuSP.
Otherwise, performance may be impacted.
Step 2. Click Save to save your setting and reset IPDS as indicated; see
“ Important setup instructions ” for more information.