Xerox DocuMate 6460, Руководство пользователя

Страница: 12 / 66

Welcome Xerox
®
DocuMate
®
6460 / 6480
User Guide 3
The Xerox
®
DocuMate
®
6460 / 6480
Scanner Features
1. Input Tray —Holds the documents in the Automatic Document Feeder for scanning.
– Extension —Pull out to support various document lengths.
– Paper Guide Switch —Push up to allow the paper guides to adjust wider for dot matrix
printer paper.
– Paper Guides —Slide to adjust to document width.
2.
Automatic Document Feeder (ADF)
—Feeds documents through the scanner during
scanning.
–
ADF Cover Release
—Press to open the Automatic Document Feeder.
3. Control Panel —OneTouch scanning controls.
–
LCD screen
—Shows the current scan settings.
– Function Buttons —Select the scan setting for the OneTouch buttons. Press the up or
down arrow to cycle through the settings.
– Simplex Button —Press to scan single-sided documents.
•
Firmware version 1.07 or higher —
After a double feed is detected and scanning
has been paused, press the button for less than 1.5 seconds to ignore the error and
continue scanning. Press the button for over 1.5 seconds to stop scanning and cancel
the job.
–
Duplex Button
—Press to scan double-sided documents.
• Firmware version 1.07 or higher — After a double feed is detected and scanning
has been paused, press the button for less than 1.5 seconds to ignore the error and
continue scanning. Press the button for over 1.5 seconds to stop scanning and cancel
the job.
– Status Light / Power Button —Turns the scanner’s power on/off and indicates the
scanner’s status.
4. Output Tray —Holds documents after being scanned.
–
Paper Stop
(Short Documents)—Flip up to keep short items stacked neatly in the output
tray after scanning. Slide to adjust to the length of the scanned documents.
1
2
3
4
5