Xerox DocuColor DocuColor 4, Руководство администратора

Страница: 27 / 166

1
5
1.3 Quick path to installation
The diagrams in the following pages show typical systems that can be used
for printing and for using Fiery WebTools. To use the diagrams, find the
page with your preferred platform and network type. Then look up the setup
procedures in the pages and books referred to in the keys.
The diagrams describe devices that use the supported networking protocols.
They are logical diagrams and are not intended to describe the physical ar-
rangement (topology) of devices on the network. A variety of physical ar-
rangements is possible with each logical arrangement. For example, twisted
pair Ethernet networks commonly use a star configuration around a hub,
rather than a bus arrangement. The design of physical networks is beyond
the scope of this manual.
If the network uses more than one protocol or more than one type of work-
station, combine the setups listed for each component of your system. Note
that multiple protocols (shown in the diagrams as parallel lines) can run on
the same cable. A solid connection from the DocuColor 4 LP/CP with an
arrow indicates that other supported network types can be operational at the
same time.
The protocols used in these diagrams are indicated as follows:
IPX (Novell)
AppleTalk
TCP/IP
Parallel
Other