page-40
0015647-0001 February 18, 1999
Getting Started Guide
Always click on Have Disk regardless of whether or not this is the first time you are adding
a printer to your workstation.
14. When the Install from Disk window appears, click
Browse.
15. The Locate File dialog box appears. Select the Winnt4 folder (the default pathname is
c:\Program Files\Splash\M Series Viewer v1.0\Winnt4).
16. Open the Winnt4 folder, select Splashm.inf and click on
Open
.
17. When the Confirmation window appears, click
OK
.
18. When the Add Printer Wizard prompts for the printer model, select
SplashM v1.0
,
then click
Next
.
19. When the Add Printer Wizard prompts you to keep or replace the printer driver
software, select
KEEP THE EXISTING DRIVER
, and click
OK
.
If you choose
Replace the existing driver
, the U.S.English print driver will be
installed, overwriting the non-U.S. English print driver.
20. When the Installation Successful window appears, click
Finish.
21. After successfully installing the printer, the
Add Printer Wizard
asks if you want your
system to use this printer as the default printer. Select the desired option (
Yes
or
No
),
then go to Section 5.6.3, on page 40 to setup the printer.
5.6.3 Printer Setup
After adding the color server, configure it as follows:
1. Open the Printers folder and right clicking on the M Series printer icon. In the pull-
down menu that appears, choose
Properties
. The Printer Properties dialog box
appears.
2. Switch to the Scheduling tab (Figure 28).
