3
3-11
Color Editor
Editing profiles
Color Editor allows you to create custom profiles by editing existing simulation or
output profiles and saving the changes as a new profile. With Color Editor, you can
fine-tune a profile on your Fiery to meet your exact specifications.
N
OTE
:
You cannot edit source profiles; only simulation and output profiles can be
customized.
Color Editor has two Edit Modes for editing output profiles.
•
Custom
—Edit output profiles and save customized versions of them.
•
% Density
—View the calibration target, which is one component of the output
profile. You cannot make changes to the calibration target in this window, but you
can import a new target (see
Color Editor also has several Edit Modes for editing simulations.
•
Master
—Create a custom
master
simulation that affects all print jobs to which it is
applied, unless a linked simulation exists for the selected combination of simulation
profile, simulation method, and output profile.
•
Quick, Full (Source GCR), or Full (Output GCR)
—Create custom
linked
simulations.
Linked simulations affect the print job only if the corresponding simulation profile,
simulation method, and output profile are selected. If you choose an output profile
and simulation method for which you have created a custom linked simulation, that
simulation is applied automatically to the job. If you choose a simulation method or
output profile for which there is no custom linked simulation, the master simulation
is automatically applied. For detailed information about simulation methods, see
N
OTE
:
If you made edits to a master simulation after you created a linked simulation,
the edits are not applied to the linked simulation.