![background image](http://html2.mh-extra.com/html/xerox/docucolor-12/docucolor-12_color-manual_3372884017.webp)
1
1-3
Managing color on the Fiery
Settings for the following options can be specified via print options when you send a
job to the Fiery. Some can also be set as defaults by the administrator during Fiery
Setup or using ColorWise Pro Tools. Settings specified via print options override the
defaults.
Fiery color print option
What it does
Color Mode
CMYK/Grayscale
or
Print Mode
Standard Color/Expert Color/Grayscale
Specifies the output color space of the job. Select CMYK, Standard Color, or
Expert Color for a full-color document.
Combine Separations
On/Off/1–PgAutomatic
On/Off
Specifies whether to print separated CMYK data as a single, four-color
composite document (see
). If you have the Fiery Graphic Arts
Package option, you can combine an unlimited number of spot color
separations along with the CMYK separations.
Rendering Style
Photographic/Presentation/Relative
Colorimetric/Absolute Colorimetric
(Default set at Setup)
Applies a Fiery
CRD
data (see
), or to any incoming data with a PostScript
definition, including CMYK.
Brightness
85% Lightest to 115% Darkest
Performs a color adjustment on all
to make the printed output
lighter or darker.
RGB Source Profile
EFIRGB/sRGB
(PC)/Apple Standard/Other/
Source 1-10/None
(Default set at Setup or with
ColorWise Pro Tools)
Applies an RGB source space definition to RGB data (see
). If you
choose the Other setting, you can specify particular settings for Gamma,
Phosphors, and White Point. See the corresponding options in this table. This
option, along with Gamma, Phosphors, and White Point, only affects
DeviceRGB or calibrated RGB color spaces.
(Other) Gamma
1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/2.6/2.8/3.0
Applies the specified
value to the RGB source space definition (see
). To use this print option, you must choose Other as the RGB Source
setting.
(Other) Phosphors
Hitachi EBU/Hitachi-Ikegami/NTSC/
Radius Pivot/SMPTE/Trinitron
Applies the specified
(monitor type) information to the RGB source
). To use this print option, you must choose
Other as the RGB Source setting.
EX12
EX2000d