manualshive.com logo in svg

Xerox DocuColor 12/DCCS50, Руководство по обслуживанию

"Xerox DocuColor 12/DCCS50" - высококачественное многофункциональное устройство для цветной печати. Для тех, кто ищет сервисный мануал или руководство, мы предлагаем бесплатное скачивание нашего Service Manual с manualshive.com. Получите необходимую информацию для уверенной работы с этим принтером.

Поделиться
Скачать
Page 31
background image

1/05

1-3

DocuColor 12/DCCS50

Service Strategy , Initial Actions

Service Call Procedures

Reissue

 

Service Strategy 

The service strategy of the DocuColor 12 copier/printer is to perform any High Frequency Ser-
vice Item (HFSI) actions before attempting to repair any problems. Some problems will be cor-
rected by this strategy without the need to diagnose them. The Repair Analysis Procedures 
(RAPs) will be used for any remaining problems. 

Problems that occur in the BASIC COPIER mode will be repaired before problems that occur 
when using the accessories. 

Image Quality problems will be repaired after all other problems are repaired. 

Service Call Procedures

The 

Service Call Procedures

 are a guide for performing any service on the DocuColor 12 

copier/printer. The procedures are designed to be used with the DocuColor 12 Service Manual. 
Perform each step in order. 

The Service Call Procedures contain the following sections: 

Initial Actions 

The Initial Actions gather information about the condition of the copier/printer and the problem 
that caused the service call. 

Call Flow 

Call Flow summarizes the sequence of the Service Call Procedures. 

Detailed Maintenance Activities

This section provides the information needed to perform the DC135 High Frequency Service 
Item (HFSI) actions.

Cleaning Procedures

This section provides the information needed to clean some components of the copier/printer. 

Final Actions 

The Final Actions test the copier/printer and return it to the customer. Administrative activities 
are also performed in the Final Action. 

Initial Actions

Purpose 

The purpose of the Initial Action section of the Service Call Procedures is to determine the rea-
son for the service call and to identify and organize the actions which must be performed. 

Procedure

1.

Gather the information about the service call and the condition of the copier/printer.
a.

Question the operator(s). Ask about the location of most recent paper jams. Ask 
about the image quality and the copier/printer performance in general, including any 
unusual sounds or other indications. 

b.

Check that the power cords are in good condition, correctly plugged in the power 
source, and free from any defects that would be a safety hazard. Ensure that the 
connector for the IDFE Wiring Harness is properly connected. Repair or replace the 
power cords as required. Check that the circuit breakers are not tripped. 

c.

Inspect any rejected copies. Inquire as to, or otherwise determine, the paper quality 
and weight. The specified paper for optimum image quality with the DocuColor 12 
copier/printer is 24# Xerox COLOR Xpressions (NASG), or Colotech + 90 gsm 
(ESG). Look for any damage to the copies, oil marks, image quality defects, or other 
indications of a problem. 

d.

Record the billing meter readings. 

e.

Enter the Diagnostics Mode. Go to the 

Dark Screen RAP

 IN SECTION 2 if the Diag-

nostic Mode can not be entered. Return here after repairing the Diagnostics entry 
problem.

NOTE: 

If a Fault Code is displayed while performing a Diagnostics Procedure, go to 

that Fault Code RAP and repair the fault. Return to Diagnostics and continue with 
the DC Procedure that you were performing. 

f.

Go to DC135 HFSI Table and determine what HSFI action is required based on the 
customer output volume. Refer to the 

Detailed Maintenance Activities

 section for the 

detailed HSFI information. Record any items that require action.

g.

Select the History File. Display and record the information in the Fail History, Jam 
History, Fail Counter, and Jam Counter. Classify this information into categories: 

Information that is related to the problem that caused the service call. 
Information that is related to secondary problems. 
Information that does not require action, such as a single occurrence of a prob-
lem.

h.

Check the Service Log for any recent activities that are related to the problem that 
caused the service call or any secondary problem. 

2.

Perform any required HSFI activities. Refer to the Detailed Maintenance Activities section. 

3.

Exit diagnostics. Try to duplicate the problem by running the same type jobs, as the cus-
tomer was running.

4.

Check the image quality in the BASIC COPIER MODE. Select the tray that is loaded with 
11 X 17 or A3 paper. If unable to complete this step, go to step 5. 
a.

Set the copier/printer controls: 

Output Color to 

Auto

 

Original Type to 

Photo and Text Halftone

Reduce/Enlarge 

Auto

Содержание DocuColor 12/DCCS50


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DocuColor 12/DCCS50

Ravas PR-INT-MX-RAVAS-ABLE Manual preview
PR-INT-MX-RAVAS-ABLE
Бренд: Ravas Страницы: 26
Maxim M190G Technical Manual preview
M190G
Бренд: Maxim Страницы: 69
Printek DP-530si Operator'S Manual preview
DP-530si
Бренд: Printek Страницы: 34
Xerox WorkCentre PRO 35 Specifications preview
WorkCentre PRO 35
Бренд: Xerox Страницы: 13
Lexmark 16C0365 - 5500 MFP Service Manual preview
16C0365 - 5500 MFP
Бренд: Lexmark Страницы: 88
Citizen iDP-3210 Service Manual preview
iDP-3210
Бренд: Citizen Страницы: 46
Xerox DocuPrint C2535 A User Manual preview
DocuPrint C2535 A
Бренд: Xerox Страницы: 120
Xerox 490 DC/ST User Manual preview
490 DC/ST
Бренд: Xerox Страницы: 85
BT PaperJet 65E User Manual preview
PaperJet 65E
Бренд: BT Страницы: 64
Canon imageRUNNER ADVANCE DX C5870i Faq Manual preview
imageRUNNER ADVANCE DX C5870i
Бренд: Canon Страницы: 100
Canon imageRUNNER ADVANCE C356iF Faq Manual preview
imageRUNNER ADVANCE C356iF
Бренд: Canon Страницы: 96
Canon imageRUNNER ADVANCE C350 series Service Manual preview
imageRUNNER ADVANCE C350 series
Бренд: Canon Страницы: 1173
Canon imageRUNNER ADVANCE DX 6870i Faq Manual preview
imageRUNNER ADVANCE DX 6870i
Бренд: Canon Страницы: 100
Canon imageRUNNER ADVANCE 715iFZ III Faq Manual preview
imageRUNNER ADVANCE 715iFZ III
Бренд: Canon Страницы: 92
Canon ImageRUNNER C1538iF Important Safety Instructions Manual preview
ImageRUNNER C1538iF
Бренд: Canon Страницы: 120
Canon imageRUNNER ADVANCE DX 717iFZ Faq Manual preview
imageRUNNER ADVANCE DX 717iFZ
Бренд: Canon Страницы: 92
Canon imageRUNNER ADVANCE DX C568iFZ Faq Manual preview
imageRUNNER ADVANCE DX C568iFZ
Бренд: Canon Страницы: 92
Canon MF720 Series Service Manual preview
MF720 Series
Бренд: Canon Страницы: 327

Бренды по названию

Популярные бренды

Загрузить еще бренды