manualshive.com logo in svg

Xerox DocuColor 12/DCCS50, Руководство по обслуживанию

"Xerox DocuColor 12/DCCS50" - высококачественное многофункциональное устройство для цветной печати. Для тех, кто ищет сервисный мануал или руководство, мы предлагаем бесплатное скачивание нашего Service Manual с manualshive.com. Получите необходимую информацию для уверенной работы с этим принтером.

Поделиться
Скачать
Page 273
background image

1/05

2-237

DocuColor 12/DCCS50

19-015 Token Ring Speed Detection Fault RAP, 19-

Status Indicator RAPs

Reissue

19-015 Token Ring Speed Detection Fault RAP

NOTE: 

There are two configurations of the IDFE for this machine. However, this RAP applies 

only to the IDFE with the GL2 product code.

NOTE: 

This fault is declared through The Centerware Internet Services (web client or web UI), 

XCMI settings, and the Configuration Report.

NOTE: 

The Integrated Digital Front End (IDFE) may be connected to either a 4 Mbps line or to 

a 16 Mbps line. If the Token Ring PWB is enabled and the drivers properly loaded, the IDFE 
automatically detects the Token Ring line speed and reports it through web client, XCMI set-
tings, and the Configuration Report. When the known speed of the Token Ring line and that 
reported by the Configuration Report, Web Browser client, and the XCMI settings do not agree, 
a 19-015 fault is declared. 

A 19-015 fault indicates that the IDFE failed to detect the proper speed of the Token Ring to 
which it is connected.

Initial Actions

•

Go  to 

GP 12 Printing Configuration Reports

, and print a Configuration Report. Check the 

Configuration Report for the speed of the Token Ring connection and verify that the Token 
Ring Interface is enabled.

Procedure

Perform the following:

1.

Review the information collected in Initial Actions.

2.

Ensure that the Token Ring PWB is plugged into Connectors J3 and J4 of the SCAN IIT 
PWBA (

PL 19.1

).

NOTE: 

This is the slot nearest the IDFE Diagnostic LEDs.

NOTE: 

Only the Power and Heartbeat LEDs will energize when a Token Ring PWBA is 

installed.

3.

Verify that the Token Ring drivers were loaded correctly.

NOTE: 

If the Token Ring PWB is enabled and operating correctly on the network, printed 

on Configuration Report will be the MAC address for the PWB:
•

Example: MAC Address=80:99:09:E4:A7:55

NOTE: 

If the Token Ring PWB is enabled, but cannot operate on the network, printed on 

the configuration report will be a MAC Address:
•

Example: MAC Address=00:00:00:00:00:00

4.

Verify that the Token Ring PWB is operating correctly on the network.

5.

Verify that the Token Ring line speed agrees with that reported by the Configuration 
Report, the Web browser client, and the XCMI settings.

6.

Reload software using the IDFE CD-ROM Drive (

GP 9 IDFE Software Installation (CD-

ROM)

).

7.

If the Token Ring line speed does not agree with the Configuration Report, the Web 
Browser and the XCMI settings, replace the Token Ring PWB (REP 19.2).

8.

If the Token Ring PWB still does not operate correctly, replace the IDFE (

PL 19.1

).

19-016 Token Ring Troubleshooting RAP

NOTE: 

There are two configurations of the IDFE for this machine. However, this RAP applies 

only to the IDFE with the GL2 product code.

This RAP is used to isolate problems related to the IDFE Token Ring PWB. The following pro-
cedure is a checklist of potential items that could be the source of problems with the Token 
Ring PWB.

Procedure

1.

Token Ring troubleshooting tips:
•

Ensure that the Token Ring PWB is correctly plugged into Connectors J3 and J4 of 
the SCAN IIT PWBA.

NOTE: 

This is the slot nearest the IDFE Diagnostic LEDs.

NOTE: 

Only the Power and Heartbeat LEDs will energize when a Token Ring PWBA 

is installed.

•

Ensure that the Token Ring PWB is correctly seated.

•

Ensure that the hardware connections are good between the IOT and IDFE.

•

Ensure that the 8 PIN Interface Connector is correctly seated in the Token Ring PWB 
and is not damaged.

•

Ensure that the twisted pair cable is good (RJ45)

•

Ensure that the port on the MAU or wall drop is good.

NOTE: 

To be enabled, the Token Ring PWBA must be installed and connected to an 

active Token Ring by use of a MAU. This can be confirmed by reading the Configura-
tion Report to determine if the Token Ring is enabled.

•

Ensure that maintenance release v1.1 or later software is installed.

NOTE: 

Source routed packets with route lengths greater than two bytes could be 

dropped  when packets are transmitted using IP or IPX protocols across a cus-
tomer’s combination bridge/router. Installation of maintenance release v1.1 software 
solves this problem.

2.

Token Ring hardware not found or installed is a generic message and can be a result of:
•

a bad connection to the network

•

a defective Token Ring PWB

•

an address conflict with the Token Ring PWB

NOTE: 

For TCP/IP, ensure that there is not a duplicate IP address on the customer’s 

network.

•

the Token Ring PWB cannot sense the speed of the Token Ring Network

•

the Novell File Servers are not referenced to on the network

Содержание DocuColor 12/DCCS50


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DocuColor 12/DCCS50

Canon PIXMA MX922 Setting Up preview
PIXMA MX922
Бренд: Canon Страницы: 29
Canon PIXMA MX410 Series Network Setup Troubleshooting preview
PIXMA MX410 Series
Бренд: Canon Страницы: 46
Canon BJC-S9000 Quick Start Manual preview
BJC-S9000
Бренд: Canon Страницы: 65
Canon PIXMA MX372 Getting Started Manual preview
PIXMA MX372
Бренд: Canon Страницы: 4
Canon MX530 series Setting Up preview
MX530 series
Бренд: Canon Страницы: 2
Canon BJC-50 Datasheet preview
BJC-50
Бренд: Canon Страницы: 2
Canon Sure shot 80 tele Remote Ui Manual preview
Sure shot 80 tele
Бренд: Canon Страницы: 39
Canon BJC6500 - BJC 6500 Color Inkjet Printer Paper Manual preview
BJC6500 - BJC 6500 Color Inkjet Printer
Бренд: Canon Страницы: 6
Canon G600 Series Getting Started preview
G600 Series
Бренд: Canon Страницы: 20
Canon imagePROGRAF iPF6450 Manual preview
imagePROGRAF iPF6450
Бренд: Canon Страницы: 35
Canon PIXMA MX340 Series Connection Manual preview
PIXMA MX340 Series
Бренд: Canon Страницы: 11
Canon PIXMA MX340 Series Network Installation Manual preview
PIXMA MX340 Series
Бренд: Canon Страницы: 16
Canon imagePROGRAF iPF6300S Setup Manual preview
imagePROGRAF iPF6300S
Бренд: Canon Страницы: 12
Canon MP980 series Connection Manual preview
MP980 series
Бренд: Canon Страницы: 19
Canon MP980 series Quick Start Manual preview
MP980 series
Бренд: Canon Страницы: 101
Canon iP4700 - PIXMA Color Inkjet Printer Getting Started preview
iP4700 - PIXMA Color Inkjet Printer
Бренд: Canon Страницы: 28
Canon i 320 Setup Instructions preview
i 320
Бренд: Canon Страницы: 2
Canon CX-G6400 Manual preview
CX-G6400
Бренд: Canon Страницы: 35

Бренды по названию

Популярные бренды

Загрузить еще бренды