Printer installation
1. Setting up the DocuColor 2006
Xerox DocuColor 2006
1-19
Printer installation
Perform this procedure
after
the Printer is unpacked, and placed in a suitable
location.
•
If you have not performed the
Preparing for the installation
procedure in
this section, do it now.
•
If the Printer is still in the original packing, go to the
Unpacking the
Printer
procedure.
1.
Locate the Output Tray in the cardboard tray removed from the top of
the printer. Install the tray by performing steps a through c.
a. Standing on the left-hand side of the Printer, hold the Output Tray
as shown.
301031B-WOL
0
30130a
Do not place the metal spring into the hole. Ensure that the metal spring
extends down against the outside of the cover.
b. Place the right-hand arm of the tray into the corresponding hole as
shown.
301032B-WOL
0
301032b
Содержание Copier
Страница 1: ...DocuColor 2006 Getting Started The Document Company XEROX...
Страница 18: ...1 Setting up the DocuColor 2006 Installing the 2 Tray Module 1 8 Xerox DocuColor 2006...
Страница 28: ...1 Setting up the DocuColor 2006 Unpacking the Printer 1 18 Xerox DocuColor 2006...
Страница 48: ...1 Setting up the DocuColor 2006 Loading paper in the paper tray 1 38 Xerox DocuColor 2006...