Network Settings
ColorQube™ 9301/9302/9303
Administration and Accounting
296
Network Settings
These settings are used to enter the
network parameters for the system. This
section provides an overview of the
options available.
Detailed instructions for network
installation are provided in the
System
Administrator Guide
.
Online/Offline
Use to disconnect the device from the
network temporarily. Selecting
Offline
disconnects the device from all networks. Any job entering the
system is held. Any current outgoing jobs are not completed while the system is offline.
Select
Online
to reconnect the device to the network.
TCP/IP Settings
This option enables the System Administrator to enter the TCP/IP settings for the device.
Advanced Settings
This option enables the System Administrator to setup the Network Settings. A warning screen is
displayed prior to accessing these settings as a Network Controller reset is required after the settings
are changed. These settings must only be accessed and entered or changed by the System
Administrator.
Network Logs
Only use this option if instructed to do so by the Xerox Support Center. It is used to download log
information which can help to troubleshoot network related problems.
USB Settings
This option is used to setup the USB port located at the rear of the device. This port is used for software
tools and for direct printing via a printer driver. It cannot be used for direct printing via a USB Flash
Drive, the USB port located on the left side of the device supports this function.
