Xerox ApeosPort-II 5010, Руководство пользователя, Страница: 492 / 619

15 Problem Solving
490
P
roblem Solv
in
g
15
033-738
O [Cause] Received abnormal JBIG data.
[Remedy] No operation is necessary.
033-740
O [Cause] The print job for the received fax document was
interrupted.
[Remedy] No operation is necessary.
033-741
O [Cause] An error occurred during fax transmission.
[Remedy] Try again. If the machine conditions are not improved by
performing the relevant remedy, contact our Customer
Support Center.
033-742
O [Cause] An error occurred during fax transmission. This error may
occur if the remaining capacity of the machine’s memory is
10% or less and Manual Send is used.
[Remedy] When this error was caused by Manual Send, connect the
line after storing the document. If the error is still not
cleared, remove unnecessary data from the hard disk to
increase free disk space, and retry again.
If the machine conditions are not improved by performing
the relevant remedy, contact our Customer Support
Center.
033-743
033-744
033-745
033-746
O [Cause] An error occurred during fax transmission.
[Remedy] Turn the machine off and on. If the machine conditions are
not improved by performing the relevant remedy, contact
our Customer Support Center.
033-747
O [Cause] The job is in pending status.
[Remedy] No operation is necessary.
033-749 O [Cause] The machine will automatically resume and print out.
[Remedy] No operation is necessary.
033-750
O [Cause] An error occurred during fax transmission.
[Remedy] Turn the machine off and on. If the machine conditions are
not improved by performing the relevant remedy, contact
our Customer Support Center.
033-755
O [Cause] A fax document was to be printed, but the print job was
canceled because the fax feature did not work.
If multiple documents stored in mailboxes are to be
printed, and one of them is a fax document, the fax
document and the documents to be printed subsequently
will not be printed out.
[Remedy] Take one of the following actions:
z
Turn the machine off and then back on.
z
Check if the phone cable connection is secured.
z
Print an Error History Report to obtain the fax-related
error code (133-xxx, 134-xxx), and then solve the
problem.
If the error persists, contact our Customer Support Center.
034-211
034-212
O [Cause] An error occurred on the fax control system.
[Remedy] Contact our Customer Support Center.
Error Code
Category
Cause and Remedy
C P F S M O
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.