Xerox 850DP - Phaser Color Solid Ink Printer Скачать руководство пользователя страница 77

Страница: 77 / 167

Version 10.0

Page 72 of 160

AccXES PJL Interface

This string specifies the name of the palette which controls pens in the Calcomp data format

interpreter. CCPALETTESOURCE determines how this palette is applied to interpreted jobs. The

string has a maximum of 32 characters in it, and the default value is “0”.

5.1.6.2.5 CCPALETTESOURCE

This parameter sets the source of control for pens in Calcomp files. Can be set to JOB so that after

initialization, the palette assigned by CCPALETTE is ignored. Otherwise, it may be set to PRINTER so

that the palette named by CCPALETTE determines the pen settings. The set of possible values is {JOB

, PRINTER}. The default value is JOB.

5.1.6.2.6 CCRESOLUTION

This parameter specifies the intended resolution of the CalComp job data. The printer will

automatically perform the resolution conversion from this resolution to the native resolution of the

printer. The range of this value varies continuously from 50 to 4064. The default value is 2032.

5.1.6.2.7 CCSYNC

For those printers that don’t support CalComp Autosynch detection, this parameter specifies the SYNC

byte. For those printers with autosynch detection, this parameter specifies as a “hint” the SYNC byte.

The user is strongly encouraged to set this value to the most likely value for SYNC, as processing

efficiency increases when the hints are correct. The range of this parameter extends from 0 to 127. The

default value is 22.

5.1.6.2.8 CCTERMEOP

This specifies a termination condition for a Calcomp file. With this parameter, the user can direct the

controller to terminate file processing when 1 or 2 consecutive EOP commands have been parsed. If the

value of this parameter is NONE, then this parameter is irrelevant to determining the end of file

condition.

5.1.6.2.9 CCTERMFORCEPLOT

When ON, a force plot command in a Calcomp file directs the controller to terminate processing of the

current file. When OFF, this parameter is irrelevant to determining the end of file condition. The

default value is ON.

5.1.6.2.10 CCTERMMANUAL

When ON, a manual command in a Calcomp file directs the controller to terminate processing of the

current file. When OFF, this parameter is irrelevant to determining the end of file condition. The

default value is OFF.

5.1.6.2.11 CCTERMNEWPLOT

When ON, a new plot command in a Calcomp file directs the controller to terminate processing of the

current file. When OFF, this parameter is irrelevant to determining the end of file condition. The

default value is OFF.

5.1.6.2.12 CCTERMPAUSE

When ON, a pause command in a Calcomp file directs the controller to terminate processing of the

current file. When OFF, this parameter is irrelevant to determining the end of file condition.

Содержание 850DP - Phaser Color Solid Ink Printer








































































































































































Результаты поиска

Содержание 850DP - Phaser Color Solid Ink Printer

Отзывы:

Бренды по названию

Популярные бренды

Xerox 850DP - Phaser Color Solid Ink Printer, Руководство пользователя

Результаты поиска

Содержание 850DP - Phaser Color Solid Ink Printer

Отзывы:

Бренды по названию

Популярные бренды