manualshive.com logo in svg

Xerox 850DP - Phaser Color Solid Ink Printer, Руководство пользователя

Поделиться
Скачать
Xerox 850DP - Phaser Color Solid Ink Printer Скачать руководство пользователя страница 106

Version 10.0

Page 101 of 160

AccXES PJL Interface

5.1.8.2.5 INTRAY<n>TYPE

This collection of variables encodes the type of media currently loaded in tray “n” in the printer. See the

MEDIATYPE variable for a list of legal values.

5.1.8.2.6 INTRAY<n>STAT

This collection of variables encodes whether the tray is defined in the printer, and if so, whether it is

present and contains media, present but running low on media, or present but empty. The possible

values are: {NONE, FULL, LOW, EMPTY}.

5.1.8.2.7 INROLL<n>SIZE

INROLL<n>SIZE details the width of the roll of media loaded onto roll “n” in the printer. See the

PAPER environment variable in the Job Processing Group for a list of valid sizes which this variable

can take. 

5.1.8.2.8 INROLL<n>TYPE (prior to V7.5)

INROLL<n>TYPE will reflect the media type loaded onto roll “n” in the printer. Refer to the variable

MEDIATYPE for possible values. 

5.1.8.2.9 INROLL<n>TYPE (V7.5 and later)

INROLL<n>TYPE will reflect the media type loaded onto roll “n” in the printer.

The valid strings that may be returned from this command may be found using the @PJL INFO

XESMEDIA command.

5.1.8.2.10 INROLL<n>STAT

This collection of variables encodes whether the roll is defined in the printer, and if so, whether it is

present and contains media, present but running low on media, or present but empty. The possible

values are: {NONE, FULL, LOW, EMPTY}.

5.1.8.2.11 MANUALSIZE

MANUALSIZE details the width of the roll of media loaded manual feed port of the printer. Currently,

the engine reports ROLL_36 always, regardless of what is actually installed. 

5.1.8.2.12 MANUALTYPE

MANUALTYPE will reflect the media type loaded in the manual feed port of the printer. Refer to the

variable MEDIATYPE for possible values. 

5.1.8.2.13 MANUALMEDIA

This command should be used in place of the MANUALTYPE command starting with AccXES V7.5.

MANUALMEDIA will reflect the media type loaded in the manual feed port of the printer.

The valid strings that may be returned from this command may be found using the @PJL INFO

XESMEDIA command.

5.1.8.2.14 MANUALSTAT

Содержание 850DP - Phaser Color Solid Ink Printer








































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды