Windows NT 4.x
Phaser® 8500/8550 Color Printer
4-11
Windows NT 4.x
This section includes:
■
Preliminary Steps
on page 4-11
■
Quick CD-ROM Install Steps
on page 4-11
■
Other Methods of Installation
on page 4-12
■
Windows NT 4.x Troubleshooting
on page 4-14
Preliminary Steps
These preliminary steps must be performed for all printers:
1.
Verify that the printer is plugged in, turned
On
, and connected to an active network.
2.
Verify that the printer is receiving network information by monitoring the LEDs on the
back of the device or on the CentreDirect External Print Server. When the printer is
connected to a functioning network and receiving traffic, its link LED is green, and its
amber traffic LED is flashing rapidly.
3.
Proceed to Quick CD-ROM Install Steps or Other Methods of Installation for the
installation method desired.
4.
Print a Configuration page and keep it for reference.
Quick CD-ROM Install Steps
To use the quick CD-ROM install option:
1.
Insert the
Software and Documentation CD-ROM
into the computer’s CD-ROM drive. If
the installer does not launch, do the following:
a.
Click
Start
, and then click
Run
.
b.
In the
Run
window, type:
<CD drive>:\INSTALL.EXE.
2.
Select your desired language from the list.
3.
Select
Install Printer Driver
.
4.
Click
I Agree
to accept the Xerox Software License Agreement.
5.
In the
Select Printer
dialog box, the default
Use Walk-Up Technology (recommended
for network printers)
is selected. Click
Next
.
6.
Follow the Use Walk-Up Technology instructions displayed.
7.
Click
Exit Program
.
Note:
If the Walk-Up Technology dialog box remains onscreen after you have completed
Steps 1–6, click the
Cancel
button, and then click
Select from the following discovered
printers
. Follow the onscreen prompts to complete the installation procedure.
See also:
Knowledge Base at
www.xerox.com/office/8500_8550support