background image

Specialty Printing

Phaser® 7300 Color Printer

19

Transparencies

Transparencies can be printed from Tray 1 or the Multi-Purpose Tray. Handle transparencies by the 
edges and with both hands to avoid fingerprints and creases, which can cause poor print quality. 

Xerox Phaser 35-Series Transparencies

Xerox recommends that you use Phaser 35-Series Transparencies, which have been specifically 
developed for use with this type of printer fuser.

To order supplies and accessories, contact your local reseller or visit the Xerox web site at:

www.xerox.com/officeprinting/7300supplies

Using non-Phaser 35-Series transparency film

The printer features a unique oil-less fuser. Phaser 35-Series Premium Transparency film is designed 
specifically to work with the printer's fuser. If you want to use non-Phaser 35-Series transparency film, 
you 

must

 use a film that meets the following specifications:

Compatible with oil-less fuser systems

Fusing temperature: 165

 degrees 

C

Transparency film that does not meet these specifications can produce poor image quality, produce a 
jam in the printer, wrap around the fuser rollers and even melt on the fuser rollers. Some non-Phaser 
35-Series transparencies have paper tape on the edge that can separate in the heat of the fuser, leading to 
damage. Using non-Phaser 35-Series transparencies may damage the fuser. Damage caused by using 
non-Phaser 35-Series transparencies might not be covered under the warranty, service agreement, or 
Total Satisfaction Guarantee. 

Note

Xerox and Xerox Phaser transparency films developed for other Xerox printers and copiers 
are not meant to be used with this printer. Using non-Phaser 35-Series transparencies may 
damage the fuser and might not be covered under the warranty.

Videos are available with instructions for loading transparencies. Videos are located on the 

Interactive Documentation CD-ROM

 and on the Xerox web site at: 

www.xerox.com/officeprinting/7300support

 

Xerox Phaser 35-Series Transparency Film

Item

Size

Description

Part Number

Premium

A/Letter (U. S.)

8.5 x 11 in.

50 sheets

016-1896-00

Premium

A4 (Metric Letter)

210 x 297 mm

50 sheets

016-1897-00

Standard

A/Letter (U. S.)

8.5 x 11 in.

50 sheets

016-1894-00

Standard

A4 (Metric Letter)

210 x 297 mm

50 sheets

016-1895-00

Содержание 7300DX - Phaser Color Laser Printer















Отзывы: