Xerox 7300DX - Phaser Color Laser Printer, Спецификация, Страница: 3 / 14

Specialty Printing
Phaser® 7300 Color Printer 14
Manual 2-sided printing
If the printer doesn’t have a duplex unit, you can still have the printer print on both sides of the paper.
However, you must have the printer print all of the odd-numbered pages first, reinsert the printed pages
in the tray, then have the printer print the even-numbered pages.
You can use Trays 1 - 5 or the Multi-Purpose Tray for manual 2-sided printing.
Paper specifics
■
For the best opacity and feed reliability, use Plain Paper that is 90 g/m
2
(24 lb. bond) paper.
■
2-sided printing on specialty paper can shorten the life of printer components.
■
For best results, do not use heavy toner coverage on side 1 of a manual 2-sided print. Increase the
top margin on side 1 to at least 12 mm (0.48 in.).
■
Print quality may be degraded on the second side of manual 2-sided prints for weights ranging
from 105-203 g/m
2
(>28-75 lb. bond, 58-112 lb. index).
Setting the printer driver for two-sided printing
Macintosh
LaserWriter 8.6
or
LaserWriter 8.7
1.
From the File menu, select Print , and then select Layout .
2.
Select Print on Both Sides .
3.
Select a binding preference.
Windows 95 ,
Windows 98 , or
Windows Me
1.
From the File menu, select Print .
2.
Click the Properties button.
3.
On the Setup tab, select Print on 2 Sides .
4.
Check or uncheck Bind on Top Edge .
Windows 2000
or
Windows XP
1.
From the File menu, select Print .
2. Click the Properties button.
3. On the Layout tab for Print on Both Sides (Duplex) , select either
Flip on Long Edge or Flip on Short Edge .
Windows NT 1. From the File menu, select Print .
2. Click the Properties button.
3. On the Page Setup tab for Print on Both Sides (Duplex Printing) ,
select either Long Edge or Short Edge .