manualshive.com logo in svg

Xerox 721P85530, Описание

Поделиться
Скачать
Xerox 721P85530 Скачать руководство пользователя страница 321

USING LOGICAL PROCESSING

XEROX DOCUPRINT 180 LPS PDL REFERENCE

7-39

PRINT

If DELIMITER=YES is coded, the user may specify if the report 
delimiters are to be printed, and if so, the output destination of the 
printed delimiters.

Syntax

RSTACK PRINT = 

option(s)

Options

Table 7-27 lists the parameter option(s) and definition(s).

TEST

This parameter defines test expression for end-of-report conditions 
for either change mode or constant criteria.

Syntax

RSTACK TEST = 

option(s)

Options

Table 7-28 lists the parameter option(s) and definition(s).

Table 7-27.

PRINT parameter option(s) and definition(s)

Option(s)

Definition(s)

BIN

Specifies that report delimiters are to be printed and 
the output delivered to the output stacker tray.

BOTH

Specifies that report delimiters are to be printed, and 
the output delivered to both the sample print tray and 
output stacker tray.

TRAY

Specifies that report delimiters are to be printed, and 
the output delivered to the sample print tray.

NONE

Specifies that report delimiters are not to be printed. 
For DELIMITER=NO, no page is printed. If the report 
is being printed in duplex mode, report delimiters are 
printed on a single-sided duplex output page. The 
parameter BOTH in duplex is treated as BIN. 

The default is NONE.

Table 7-28.

TEST parameter option(s) and definition(s)

Option(s)

Definition(s)

test-exp

Defines test expression for end-of-report conditions 
for either change mode or constant criteria. The 
format and syntax of a test-exp are defined in the 
“Test expression definition” section. If a test-exp is 
satisfied, the record specifies an end-of-report 
condition.

There is no default.

Содержание 721P85530









































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды