Printing a job using the DocuSP web interface
Guide to Printing Using Xerox Production Print Services
4-12
1. On the Job Submission window, select [Stocks...].
2. On the stock window, select [User Stock...]. The User Stock
dialog window is displayed.
3. On the User Stock window, make specifications in the fields
as desired, or select the [Printer Default] check box to specify
the setting that was made at the printer controller. The
following parameters are available:
•
[Name]: Either select one of the printer stock names from
the Name pull-down menu; or select [Custom], and enter
a name of up to 255 characters in the text box.
•
[Color]: Select a color for the stock from the pull-down
menu or select [Custom] and enter a custom color in the
text box.
•
[Size]: Select one of the standard paper size options or
[Custom] from the pull-down menu.
If you select [Custom], the [width] and [height] text boxes
are enabled, and you can enter a custom width and height
(length) for the stock.
Default size: The default stock size for this field is
determined by the unit of measure that was specified on
the Preferences window. (Refer to “Setting user
preferences,” later in this chapter.)
–
Metric systems: 213 mm by 279 mm (A4)
–
Systems using inches: 8 1/2 by 11 inch (US Letter)
•
[Weight]: Either select a standard weight from the pull-
down menu; or select [Custom], and enter the gsm
(grams per square meter) weight in the text box.
For equivalent weights in pounds, refer to Helpful Facts
about Paper, which is delivered with your printing system.
•
[Type]: Select a stock type from the pull-down menu.
Available stock types vary, depending on your printer. To
enter a custom type, select [Custom] from the pull-down
menu. Enter a custom type in the text box. If either
Custom or Pre-Cut tabs is selected, an order count may
be specified. The Order Count is defined by how many
sheets that are in a set before a new set begins.
•
Drilled: Select the [Drilled] check box if you want to
specify that the stock type that you selected has drilled
holes.
Содержание 701P40016
