background image

Tape Client Job Submission Guide

vii

Safety

Never use supplies or cleaning materials for other than their 
intended purposes. Keep all materials out of the reach of 
children. 

Never operate the equipment if you notice unusual noises or 
odors. Disconnect the power cord from the electrical outlet 
and call service to correct the problem. 

If you need any additional safety information concerning the 
equipment or materials Xerox supplies, call Xerox Product Safety 
at the following toll-free number in the United States:

1-800-828-6571

For customers outside the United States, contact your local 
Xerox representative or operating company.

Operation safety: Europe

This Xerox product and supplies are manufactured, tested and 
certified to strict safety regulations, electromagnetic regulations 
and established environmental standards.

Any unauthorised alteration, which may include the addition of 
new functions or connection of external devices, may impact the 
product certification.

Please contact your Xerox representative for more information.

Warning markings

All warning instructions marked on or supplied with the product 
should be followed.

This WARNING alerts users to areas of the product where there 
is the possibility of personal damage.

This WARNING alerts users to areas of the product where there 
are heated surfaces, which should not be touched.

Содержание 701P21110 Guide

















































Отзывы: