manualshive.com logo in svg

Xerox 4520, Руководство пользователя

Поделиться
Скачать
Xerox 4520 Скачать руководство пользователя страница 198

 

D i s p l a y e d   C o n t r o l   P a n e l   M e s s a g e s

 

7-24

 

 

 

❖

 

  4 5 2 0 / 4 5 2 0 m p   U s e r ’ s   G u i d e

 

Warning 400/B5

 

This message appears in PCL when the printer has changed resolution to 400 or 
page protection to B5; appears in PostScript when the page size is B5 and the 
printer has changed resolution to 400.

This is a transient warning to advise that, due to insufficient memory to print with 
the requested settings, either the resolution or page protection has been changed.

The message clears when the next job starts.

ACTION: None

 

Warning 400/C10

 

This message appears in PCL when the printer has changed resolution to 400 or 
page protection to C10; appears in PostScript when the page size is C10 and the 
printer has changed resolution to 400.

This is a transient warning to advise that, due to insufficient memory to print with 
the requested settings, either the resolution or page protection has been changed.

The message clears when the next job starts.

ACTION: None

 

Warning 400/C5

 

This message appears in PCL when the printer has changed resolution to 400 or 
page protection to C5; appears in PostScript when the page size is C5 and the 
printer has changed resolution to 400.

This is a transient warning to advise that, due to insufficient memory to print with 
the requested settings, either the resolution or page protection has been changed.

The message clears when the next job starts.

ACTION: None

 

Warning 400/DL

 

This message appears in PCL when the printer has changed resolution to 400 or 
page protection to DL; appears in PostScript when the page size is DL and the 
printer has changed resolution to 400.

This is a transient warning to advise that, due to insufficient memory to print with 
the requested settings, either the resolution or page protection has been changed.

The message clears when the next job starts.

ACTION: None

 

Figure 7.2

 Control Panel messages

 

 (continued)

 

Message

 

Description/Action 

WUG-CH07  Page 24  Black,Red,Cyan  Wednesday, January 25, 1995 3:45 PM

Содержание 4520























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды