manualshive.com logo in svg

Xerox 4520, Руководство пользователя

Поделиться
Скачать
Xerox 4520 Скачать руководство пользователя страница 179

 

D i s p l a y e d   C o n t r o l   P a n e l   M e s s a g e s

 

C h a p t e r   7 :   T r o u b l e s h o o t i n g  

 

❖

 

 

 

7-5

 

Control Panel messages are listed in alphabetical order in 

Figure 7.2, preceded by numerical diagnostic error codes.

 

Not listed are the Control Panel menu options, settings, or 

functions covered in Chapter 3: Using the Control Panel

 

.

 

Some two-line messages are separated by the top line and 

bottom line. In these instances, look up each line of the 

message separately.

 

In Figure 7.2, “ACTION

 

:” indicates what you must do to 

 

respond to or clear the message.

 

Figure 7.2

 Control Panel messages 

 

Message

 

Description/Action 

 

0001

 

†

†

 

Appears in the top left 
side of the display. 
Indicates which module 
failed.

 

The main controller board has failed. 

ACTION: Replace controller, or contact your dealer or Xerox / Rank Xerox.

 

0040

 

†

†

 

Appears in the top left 
side of the display. 
Indicates which module 
failed.

 

A PostScript checksum error has occurred. 

ACTION: The PostScript card has failed and needs to be replaced.

 

0100

 

†

†

 

Appears in the top left 
side of the display. 

Indicates which module 
failed.

 

SIMM in slot 0 has failed. 

ACTION: Move the SIMM to another slot; see 

 

“Installing a SIMM” (page 5-5)

 

. If a 

memory error (0101 or 0102) occurs again, replace the SIMM. If there is no error, 
the main controller board has failed. Contact your dealer or Xerox / Rank Xerox.

 

0101

 

†

†

 

Appears in the top left 
side of the display. 

Indicates which module 
failed.

 

SIMM in slot 1 has failed. 

ACTION: Move the SIMM to another slot; see 

 

“Installing a SIMM” (page 5-5)

 

. If a 

memory error (0100 or 0102) occurs again, replace the SIMM. If there is no error, 
the main controller board has failed. Contact your dealer or Xerox / Rank Xerox.

Displayed

Control Panel

Messages

Note

WUG-CH07  Page 5  Black,Red,Cyan  Wednesday, January 25, 1995 3:45 PM

Содержание 4520























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды