Xerox 4235, Руководство по планированию установки

Страница: 40 / 148

SITE PLANNING
3-6 XEROX 4235 LPS INSTALLATION PLANNING GUIDE
Electrical requirements
Ensure that electrical outlets are available for modems,
communication modules, or other equipment. You may need
to order a telephone line and jack for communication
equipment.
Provide electrical outlets for equipment, such as a modem or
communication module. You may need to order a telephone
line and jack for communication equipment.
Note: The 60 Hz laser printing system requires a dedicated
circuit (a circuit to which no other equipment or appliance is
connected).
Table 3-1 lists the electrical requirements for a 60 Hz 4235 LPS.
Table 3-1. Requirements for 60 Hz laser printing system
Nominal voltage: 115 volts ac single phase
Voltage range: 104 to 127 volts ac
Nominal frequency:
60 Hz
Frequency range:
59.7 to 60.3 Hz, single phase
Ampere circuit: 15 amp dedicated (branch impedance
should be less than .75 ohms)
Power consumption:
1.3 KVA
Power cord: 8 feet (3 meters)
Table 3-2 lists the electrical requirements for a 50 Hz 4235 LPS.
Table 3-2. Requirements for 50 Hz laser printing system
Nominal voltage: 220 volts VAC, single phase
Voltage range 220 VAC: 198 to 242 volts ac (an
external step-up transformer is required
below 198 volts)
240 VAC: 216 to 264 volts ac
Nominal frequency 50 Hz
Frequency range 49.5 to 50.5 Hz, single phase
Circuit 2.2 KVA
Power consumption 1.5 KVA
Power cord 8 feet (3 meters)
Communication requirements
The 4235 LPS may require additional communications
equipment to successfully communicate with your host