Xerox 4050, Планирование установки

Страница: 28 / 64

PREINSTALLATION
There are two possible cable configurations:
•
40 ft cable from the LPS to the 180 CTS, with 25 ft cables
connecting other components
•
25 ft cable from the LPS to the 180 CTS, with 15 ft cables
connecting the LPS to the switchbox and a 25 ft cable
connecting the 180 CTS to the switchbox.
Figure 1-15. 180 CTS dual channel option: online only
configuration
Notes:
All printers have online only capability.
Two printers are sharing one 180 CTS with a second transport.
Two 25 ft/7.6 m cables or two 40 ft/12.4 m cables connect the
printers with the 180 CTS transports.
Interface requirements
This section describes requirements for the various interface
environments.
Channel-attached
For an online configuration with an IBM host system, supply the
following cables:
•
Bus and tag cables (bus in, bus out, tag in, tag out)
•
Emergency Power Off (EPO) cable (optional)
•
Terminators (if necessary, due to location on channel).
For your convenience, it is possible to purchase the bus and tag
cables for the printer through Xerox. Contact your Xerox sales
representative for current pricing and order information.
Third-party connections
Xerox supports a number of third-party connections. For product
recommendations and ordering information, contact The Xerox
Connection.
Reference Refer to the back of this manual for information regarding The
Xerox Connection.
1-22 XEROX 4050/4090/4450/4650 LPS INSTALLATION PLANNING