Xerox Phaser 3635 System Administration Guide
171
9.
Click on the
[.hd]
file.
10.
Click on
the
[Open]
button.
11.
Click on
the
[Install Software]
button to proceed with the upgrade.
If prompted, enter the Administrator’s
User ID
[admin]
and
Password
[1111]
, and
click on
[Login]
.
12.
The file will be sent to the printer and will disable the printing functionality. The web
browser will become inactive and you will not be able to access the machine via this
method until the upgrade has completed and the machine has rebooted. The
upgrade should take no longer than 30 minutes.
13.
Once the machine has completed the upgrade it will reboot automatically. The
configuration report will print (if enabled). Check the configuration report to verify
that the software level has changed.
14.
Your machine can be set to automatically schedule machine software upgrades from
a central server at a specific time on a regular basis.
Manual upgrade using a USB flash drive
This section provides instructions to upgrade machine software via a Software Upgrade file
stored on a USB flash drive.
NOTE:
The print queue will be used for this procedure, so further jobs will not be printed
until the upgrade has finished.
All configured network settings and installed options will be retained by the machine after
the Software Upgrade process.
Information Checklist
Before starting the procedure, please ensure that the following items have been performed:
1.
The Software Upgrade file obtained from www.xerox.com or your Customer Service
Representative. The file will have an
[.hd]
extension.
IMPORTANT:
It is important to obtain the correct upgrade file for your particular
model of machine. Xerox recommends that the file is stored in a subdirectory on the
USB flash drive so that it is easier to locate from the machine’s User Interface.
2.
If you are performing the upgrade on a networked (connected printer) machine,
ensure that the machine is online before continuing.
Procedure
1.
Plug in the USB flash drive into the USB port at the front or side of the machine.
2.
Select
[Print from USB]
from the pop-up menu.
3.
A list of files and folders on the USB flash drive will appear.
4.
Select the Upgrade File
[.hd]
by touching it.
5.
Select
[Add]
and a checkmark will display next to the file.
6.
Select
[Done]
.
Содержание 3635MFP - Phaser B/W Laser
