Xerox 3400N - Phaser B/W Laser Printer, Руководство по обслуживанию

Страница: 14 / 81

General Information 3
,,
■
The Xerox Phaser 3400 is a desktop laser printer capable of print speeds of
17 ppm (page per minute), on standard 8.5 x 11 and 16 ppm for A4, with a
native resolution of 600 x 600 dpi (dots per inch). Using Image Enhancement
technology, 1200 x 1200 dpi can be achieved with PCL6 and
PostScript Level 3 drivers.
■
The Xerox Phaser 3400 printer operates at 110 V at 60 Hz or 220 V at 50 Hz,
using approximately 300 Watts in Print Mode, 70 Watts in Standby and
20 Watts in power saver mode.
■
The system controller board contains a 133-MHz, 32-bit RISC processor. The
standard memory capacity is 16 Mbytes, expandable to 80 Mbytes by adding
an additional DIMM. The board contains flash ROM that allows for easy
updating of the firmware.
■
The Xerox Phaser 3400 printer comes standard with PCL5e and PCL6
emulation with 45 scalable fonts and 1 PCL bit-mapped font. The printer has
PostScript Level 3 and Epson FX80 emulations.
■
The Print Engine Controller Board generates all the voltages for the printer and
controls the individual printer components.
■
The Laser Assembly provides the exposure function for the xerographic
procedure.
■
The Print Cartridge is a Customer Replaceable Consumable (CRC).
■
The Fuser Assembly contains the entire fuser subsystem and is a field
replaceable unit (FRU).
■
The printer can handle various types of media including paper, envelopes,
transparencies and labels.
■
Remote Control Panel software is provided with the Phaser 3400 printer. This
software allows the user to modify the settings of the printer.
■
The printer comes standard with one 550-sheet paper tray, a face-down output
tray, a face-up output tray and a multi-purpose feeder.
■
Options available for the Xerox Phaser 3400 printer:
■
550-Sheet Lower Paper Feeder (called out as Paper Tray 2 throughout this
manual).
■
SDRAM DIMM memory upgrade
■
Network Interface Card