www.xerall.com
6
Battery Installation
Open the battery cover on the back side of the transmitter, insert 4 AA batteries
following the polarity indicators. (Picture 1/2, battery is not included.)
Alkaline Battery
Picture 1
Picture 2
Battery Cover
Phone Installation Instruction
Notice
：
Make sure that the button on the phone is not clamped.
Picture 3
Picture 4
Picture 5
Picture 6
1. Take out the phone holder and insert into the controller(Picture 3).
3. When taking out the phone clip, you need to press the clip buckle behind the phone
clip at the same time, so that the buckle can be closed and removed easily.
2. Pull out upper clamp of the holder ( Picture 4/5), put the phone into the holder,
then release the clamp, and the phone will be fixed on the holder( Picture 6).
1.Make sure the electrodes are correct.
2.Do not mix new with old batteries.
3.Do not mix different kinds of batteries.
4.Do not charge the non rechargeable battery.
Notice:
www.xerall.com
