Rover-X User Manual Version 1.0
9
Messages from the Rover
There are several messages sent from the Rover-X, depending on setup and conditions. Below
are examples of the most common messages.
Version
The Version message has a summary of the firmware and hardware revision of the device. It
also displays reset information and the IMEI of the device.
Powerup: true, Ascii: Rover-X v1.0-11743. dev:4 Hw:7.1.1 SN=1000
IMEI:300434061233400 Reset Count: 15 Latest Reset Reason: 1
Version
Firmware Version
Product; Major, minor, build of firmware
Hw
Hardware revision, set during assembly
SN
The unit’s serial number
IMEI
The unique number of the device’s Iridium
modem
Reset Count
The number of resets since device was built
Latest Reset Reason
Cause of last reset
Unlock
The Rover-X uses unlock codes as a security measure to prevent unauthorized commands. The
Rover-X sends this code automatically in the first Iridium session to keep the user, and
XeosOnline, up to date on this code. Remember that messages are only sent to destinations
that are allowed to receive them.
Any commands which do not include a valid unlock code as the first line will be ignored by the
Rover, but will prompt the unit to reply with a valid unlock code to all provisioned addresses.
See
for more details on the Unlock Code.
Unlock Code: 19235
