Rover User Manual Version 3.0
9
Quickstart
Before using the Rover
Ensure the IMEI of your device is activated through your chosen Iridium
provider and intended message recipients are added to its account ahead
of deployment.
Power-Up
Battery Installation
The Rover automatically turns on once all batteries are installed. The device must
be turned off via magnet or battery removal.
Magnet
Swipe the magnet slowly along the “SWIPE ON/OFF HERE” label
horizontally until the flashing
GREEN LED
on the top of the device remains
solid. The green LED will flash again while the device completes power-
up.
Confirm Transmission
Turn the device on and place it outside in view of as much of the
sky as possible.
The unit will transmit a power-up message, and transmit one GPS
fix every 10 minutes at default settings within 5 minutes of
power-up for one hour.
Confirm that these messages are being received by your email
and/or XeosOnline.
Operation
When deploying the unit, power it up by swiping the magnet.
Once the unit is confirmed to be on, it is ready to be deployed.
Turn the Rover OFF using the same magnet method as turning ON, with the
RED LED
in
place of the green.
