- 7 -
Attention:
Set the rotational speed to zero before you switch on the device!
Attention:
The sliding switch on the back of the device must be set to the "hand" position.
1.
Please ensure that rotational
speed adjusting knob 5 is set in
the zero position.
2.
Insert plug 1 (Fig. 3) at the
connecting cable of the
handpiece into the designated
socket 2 in the control unit.
3.
Set the required direction of
rotation using switch 4
4.
Switch on the device with the On-
Off switch 5.
5.
Set the rotational speed using the
rotational speed adjusting knob
3. You must comply with the
manufacturer’s rotational speed
specifications for the bits and
cutters.
Attention:
The rotational speed also can be varied with the rotational speed adjusting knob
during operation.
6.2 Operation with rotational speed adjustment using the food
pedal (accessory, not included in delivery)
The foot pedal enables convenient and fatigue-proof work without having to set down
the handpiece during work to adjust the rotational speed, or without having to switch
the handpiece on or off: Switching the device on and preselecting the rotational
speed is done conveniently under the table with your foot. The further you push the
pedal down with your foot, the higher the handpiece turns.
Attention:
The sliding switch at the back of the device
must be set to the "foot" position.
Insert the plug of the foot pedal connecting
cable 1 (Fig. 4) in the designated socket 2
in the rear panel of the housing and
position the foot pedal.
The pedal pressure is used to select the
working rotational speed.
Attention:
Fig. 3
