background image

 XENOX 

Note:

 metal and voltage

detector

Dear Customer,

Before using the detector, please read the

attached operating instructions.

Legend (see Fig. 1)

2.

3.

4.

5.

6.

LED display for metal detection or

voltage detection

Adjuster wheel for switching on and

adjusting detector

Metal detection (M) and voltage
detection 

 selector switch

Battery compartment cover

Sensor unit for metal detection and
voltage detection

Audio signal

Inserting and replacing battery

1. Open battery compartment 4 (Fig. 

2. Connect battery; do not to transpose

the positive and negative terminals.

3. Replace battery compartment cover.

 metal or 

The sensitivity of the detector must be

reset before each use.

When resetting the detector, make sure
that there are no metal components

(wristwatches) or current-carrying wires

within a one-metre radius.

During adjustment, hold the device in the
position (vertical or horizontal) in which

the wail is to be scanned.

Hold the detector as you would for wall

scanning.

1. Set the selector switch to 

 for

metal detection or 

 for voltage

detection 3 (Fig. 1).

2. Switch on the detector using adjuster

wheel 2 (Fig. 1).

If the detector is set to 

 an immediate

intermittent audio signal will sound briefly

and then stop.

3. Rotate the adjuster wheel until LED 1

(Fig. 1) illuminates and the audio signal

sounds (Setting M = continuous audio
signal, setting V = intermittent audio
signal)

4. Slowly rotate the adjuster wheel in the

reverse direction until the audio signal

stops and the LED extinguishes.

Note:

The less the adjuster wheel is rotated in

the reverse direction, the more sensitive
the setting and the greater the

penetration depth become (required

especially for flat-webbed house wire).

5. Slide the detector slowly and uniformly

in a horizontal motion over the wall

surface (Fig. 2).

Due to incorrect use or unfavourable

environmental influences, it is possible

that metal or electrical conductors

will not be properly detected.

The manufacturer cannot therefore

guarantee certainty of detection.

Отзывы: