manualshive.com logo in svg

Xenon 1900, Руководство пользователя, Страница: 329 / 356

Поделиться
Скачать
Xenon 1900 Скачать руководство пользователя страница 329

13 - 3

Replacing a Xenon Interface Cable

1.

Turn the power to the host sys-
tem OFF.

2.

Disconnect the scanner’s cable 
from the terminal or computer.

3.

Locate the small hole on the 
back of the scanner’s handle.  
This is the cable release.

4.

Straighten one end of a paper 
clip.

5.

Insert the end of the paper clip 
into the small hole and press in.  
This depresses the retention 
tab, releasing the connector.  
Pull the connector out while 
maintaining pressure on the 
paper clip, then remove the paper clip.

6.

Replace with the new cable.  

 

Insert the connector into the opening and press firmly.  The connector 
is keyed to go in only one way, and will click into place.

Replacing a Granit Interface Cable

1.

Turn the power to the host system 
OFF.

2.

Disconnect the scanner’s cable from 
the terminal or computer.

3.

Unscrew the locking plate on the 
bottom of the scanner.

4.

Slide the locking plate away from the 
connector and pull the cable out of the 
scanner.

5.

Replace with the new cable.  

 

Insert the connector into the opening 
and press firmly.  

6.

Slide the locking plate over the base of 
the connector to secure the cable, and 
screw the plate into place.

Cable
Release

Содержание 1900





































































































































































































































































































































































Отзывы:

Нет отзывов