XENO XNR44P, Руководство пользователя

Страница: 49 / 139

47 | Chapter 1 : NVR
You also set the percentage for HDD Usage. For example, when Usage is 50%, NVR will notify by a camera popup or a beep
sound when HDD is 50%.
4.4.3 Motion Alarm
Select Motion alarm to record only when motion detection is triggered by NVR S/W upon you defined motion area.
An alarm signal is sent via the selected sensor-out channel.
 COPY SETTINGS
Upon pressing Copy Settings button, Copy Settings popup will appear. In this popup, choose the camera you
want to copy at the “From” field. Choose the parameters such as Use, Notify, Relay, and Dwell Time on the
check box. Check on the checkbox next to the sensor numbers to apply the copy setting(s) to another channel
on the “To” box.
4.4.4 Notification

Remote Notify
The system can notify an alarm message to the IP address of Advanced Client Software over the network.
You can choose from a selection of different kinds of alarms by pressing “ADD.” Alarms can be generated by Sensor, Motion
Detection, Disk Full, Admin PW Changed, Video Loss, and Power On/Off.
N
OTE
“Motion Alarm” here means alarm triggered by motion detection set by motion menu of Network Camera.